Parts

Versatile Aluminium E-Bike Cranks specifically designed for the latest breed of mountain e-bikes. Proudly Designed, Tested and Manufactured in Barnoldswick, UK. Now produced three different offsets to suit Specialized, Brose/Yamaha and Bosch motors. KEY FEATURES - Designed for maximum ground clearance - Self extracting system for easy fitting and removal - Available in 155mm and 165mm length - Optimised Q-factor for compatibility with most frame/motor combinations - Arms available in black, silver, bronze, blue, red, purple and orange - Proudly Designed, Tested and Manufactured in Barnoldswick, UK - Weight: 472g - Forged and CNC machined 7150 series aluminium alloy crank arms - Compatible with motor systems using an ISIS spline axle/crank arm interface only.

Versatile Aluminium E-Bike Cranks specifically designed for the latest breed of mountain e-bikes. Proudly Designed, Tested and Manufactured in Barnoldswick, UK. Now produced three different offsets to suit Specialized, Brose/Yamaha and Bosch motors. Specialized Offset - This crank model is most suitable for Specialized Turbo systems using the ISIS mount including: Levo, Kenevo, Vado, Como, Turbo Levo e-bikes. Please note this model is not suitable for any Levo SL MTN E-Bikes using the Specialized SL 1.1 M30 motor. KEY FEATURES - Designed for maximum ground clearance - Self extracting system for easy fitting and removal - Available in 155mm and 165mm length - Optimised Q-factor for compatibility with most frame/motor combinations - Arms available in black, silver, bronze, blue, red, purple and orange - Proudly Designed, Tested and Manufactured in Barnoldswick, UK - Weight: 472g - Forged and CNC machined 7150 series aluminium alloy crank arms - Compatible with motor systems using an ISIS spline axle/crank arm interface only.

The Tech 4 X2 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation. Combine this with an updated X2 Postmount or Flatmount caliper a lightweight adjustable brake. KEY FEATURES - Increased power versus Tech 3 - Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. - Hinged clamp reducing weight and to improve ergonomics - Tool free bite point and reach adjustments - Hybrid piston design - Rigid CNC'd one piece caliper - Compatible with a wider range of current shifter options - Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange. - Choose either standard or braided hose (braided hose is an extra cost) - 30% pressure increase compared with the Tech 3 brake - Reservoir area increased to lower overall stack height. - Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options. - Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. - The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3 - All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here. - Maxium Rotor thickness for X2 caliper 2.3mm Flatmount Caliper Mount options: - Mount Z: Required to fit the X2 FM caliper onto Front Flatmount standard and use a Ø160 disc – Front Flatmount standard is typically found on road/gravel/CX forks - Mount Y: Required to fit the X2 FM caliper onto Rear Flatmount standard using Ø160 disc – Rear Flatmount std is typically found on the back of some road/grave/CX frame but also lately on light XC frames - The caliper will also fit directly on Flatmount rear standard using a Ø140 disc. - For more information please see Hope's guides in the manuals and diagrams section. **Note** - The Flatmount X2 caliper is designed for use with the Hope Tech 4, Tech 3, XCR Pro and Tech/Tech Evo levers only.

The XCR Pro lever is the ultimate in lightweight design. With a Carbon lever blade and titanium hardware, combined with an XCR X2 caliper you have the benchmark lightweight brake KEY FEATURES - Lightweight minimalist design - Carbon blade and titanium hardware - Lever reach adjustment - Hinge clamp for easy installation - CNC Machined from high grade forged aluminium billet - 10% Power increase over Race Evo lever - Postmount and Flatmount Caliper Options available - Crimped hose design on caliper - Rigid CNC'd one piece caliper - Lightweight aluminium backed pads - Compatible with all current Tech 3 shifter mounts - Available in Black, Silver, Bronze, Red, Blue, Orange & Purple - Available with black hose only - Weight from 199g - Maximum Rotor thickness for X2 caliper 2.3mm Flatmount Caliper Mount options: - Mount Z: Required to fit the X2 FM caliper onto Front Flatmount standard and use a Ø160 disc – Front Flatmount standard is typically found on road/gravel/CX forks - Mount Y: Required to fit the X2 FM caliper onto Rear Flatmount standard using Ø160 disc – Rear Flatmount std is typically found on the back of some road/grave/CX frame but also lately on light XC frames - The caliper will also fit directly on Flatmount rear standard using a Ø140 disc. For more information please see Hope's guides in the manuals and diagrams section. **Note** - The Flatmount X2 caliper is designed for use with the Hope Tech 3, XCR Pro and Tech/Tech Evo levers only.

Thanks to the innovative formula of KMC GO CHAIN WAX, the premium KMC chains treated with our wax offer next to high efficiency an unrivalled durability. Compared to oil-based lubricants, waxed chains are less susceptible to dirt build-up, increasing drivetrain life and reducing cleaning intervals. - Compatible with all 11-speed derailleur systems - Waxed with KMC GO - Slotted inner- and outer plates and hollow pins - Perfect shifting thanks to Double X-Bridge - Includes a MissingLink - Size: 1/2" X 11/128" - Pin length: 5.65 mm - Weight per 110 links: 244 g - Length: 118 links

MAGURA is offering the Shiftmix clamp, which will help to optimize your cockpit. - Shift and brake lever are mounted by one clamp system to the bar saving weight and gaining space - Combines Sram Matchmaker controls with MAGURA brake lever assemblies

Shimano Deore hydraulic disc brakes offer reliable power and a rigid brake design for a multitude of riding styles, from XC to trail. The BL-MT501 levers feature a smooth and durable master cylinder design for sleek and stable braking, while the BR-MT520 4-piston calipers offer rapid initial pad contact and controllable brake power modulation. - 2-finger lever with tooled reach adjustment - The I-SPEC II clamp band offers optional integrated shifter setups - Brakes are pre-bled for convenient installation

- Steel cable noodle with alloy end caps - Includes plastic liner

CNC machined 6061 aluminum Black anodized finish Thru Axle Thread Pitch M12x1.75 Santa Cruz: 04-16871, 23-15651 Includes DO nut 23-16458 Juliana Quincy 1 - 2022+ Santa Cruz Stigmata 2 - 2015-2019 Stigmata 3 - 2019-2023

CNC machined 6061 aluminum Black anodized finish Thru Axle Thread M12x1.0 Use without the B-Link when attaching Adds direct mount compatibility with Shimano mountain deraileurs to any SRAM UDH compatible frame. Optimized for Shimano Saint (RD-M820), Deore (RD-M610, RD-M5120, RD-M4120), Deore XT (RD-M8000, RD-M8050), SLX (RD-M7000-10, RD-M670), and Altus (RD-M2000). Retains ability of original SRAM UDH to rotate under impact to help protect the derailleur in the event of an impact.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

RaceFace Crank Arm Fixing Bolts - M15

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

Service parts for Fox suspension.

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually

Replacement piston and seals for Hope disc brake calipers.

Silver aluminum headset spacers for 1-1/8" fork steerer. 5mm thick. Inner Diameter: 28.9mm Outer Diameter: 34.4mm Thickness: 5mm Precision-machined aluminum Polished aluminum Bag of 10 spacers

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm