Filter By:
- Bar Ends (1)
- BMX (2)
- Bottom Brackets (27)
- Brakes/Levers/Pads (89)
- Cables (33)
- Cassettes/Freewheels (40)
- Chainrings (32)
- Chains (38)
- Show More Categories
- Cranksets (18)
- Derailleurs (29)
- Forks (2)
- Handlebar Grips/Tape (45)
- Handlebars (19)
- Headsets (19)
- Pedals (33)
- Saddles/Pads (27)
- Seatposts (12)
- Shift/Brake Combinations (12)
- Shifters (24)
- Stems (15)
- Other (145)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$17.00
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$14.95
These bolts are designed as a direct fit for 30 Tooth x 104 BCD threaded chainring. These are alloy bolts with 4mm hex heads and 10mm length.
- Designed for M8 x .75 thread pitch
- 10mm long
- 4mm hex head
- Bolt length is laser engraved onto the bolt head for easy length identification
- 6-7 Nm installation torque with light grease on threads only
$20.00
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner.
- 6mm length
- Made in the US out of 7075-T6 Aluminum
- Has hex heads on both the bolt and nut for easy installation
- Max torque of 7-8 Nm with light grease on threads only
$30.00
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner.
- 6mm length
- Made in the US out of 7075-T6 Aluminum
- Has hex heads on both the bolt and nut for easy installation
- Max torque of 7-8 Nm with light grease on threads only
$30.00
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.
$30.00
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano's current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It's an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter.
- Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs
- CNC machined from 6061-T6 aluminum with stainless steel bolt
- Does not change the derailleurs total chain wrap capacity
- Fits standard derailleur hangers only
- Best used with Single or Double Setups - see manufacturer's site for more details
$40.00
Wolf Tooth Supple handlebar tape is extra-thick, extra-wide, extra-soft, and extra-tacky. Designed for the abuse of unforgiving trails, the 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap.
- 5mm thick, 100% silicone is washable, resistant to wear and packing out
- Self-fusing silicone finishing tape included for a clean finishing touch
$49.95 - $55.00
Light, strong with extra tall teeth, the Wolf Tooth Aluminum Single Speed Cog is a lightweight option for single speed cogs that's offered in a variety of sizes.
- Wide 4.5mm base won't dig into your freehub
- Made of 7075 Aluminum Alloy for durability and lightness
- Made in the USA
$60.00
Designed to be an extra durable single speed cog option, the Stainless Steel cog features extra tall teeth and a wide 4.5 mm base to limit freehub gouging.
- Made from hardened and electropolished 416 stainless steel
compatible with 9,10,11 speed chains
$65.00
Looking for a SRAM XO1, X1, GX, and NX chainring with the proven chain retention of our patented Drop-Stop® chainrings? Wolf Tooth has what you need in these beautifully machined 94 BCD bolt-on chainrings.
- Fits any 94 BCD SRAM crankset
- Drop-Stop® technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.
- Alternating wide/narrow tooth pattern prevents chain derailment
Compatibility:
- These rings fit any SRAM mountain bike crankset with a 94 BCD.
Note that we also offer SRAM direct mount chainrings for standard, boost and BB30 short spindle cranksets and some stainless steel versions.
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention)
- Chainline - 49mm
- Provides a great chainline on most boost bikes.
Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
DROP-STOP A
Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc.
NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy
Recommendations -
If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.
Tech Specs:
- Weight: 30t • 44g | 32t • 54g | 34t • 63g
- Material: 7075-T6 aluminum
- Made in the USA
- US Patent 958123
$65.00
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$69.95 - $79.95
"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval.
Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing.
We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone.
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains.
Compatibility
- Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect)
- Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring.
- Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring.
- Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available.
- Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
--- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
- Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost)
- Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A.
Recommendations
- If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."
$70.00
ReMote Dropper Lever
- Lever pivots on a 21mm ball bearing for smooth operation
- Cable Kind Clamp does not damage secured cables and features captive hardware.
- Includes barrel adjuster for on the fly changes
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.
$70.00
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$75.00
The ReMote BarCentric is a dropper lever option for bikes with front shifters, lockout levers, or e-bike controls. The slender design of the ReMote BarCentric allows it to easily fit between the left grip and levers with four potential lever positioning options to avoid any interference with existing levers. This dropper lever has a ring shape that encompasses the handlebar, while also serving as a pivot point to provide the rider with extra leverage, making it easier to press the lever.
- Compatible with left side controls including 2x shifters, suspension lockout levers, and under-bar e-bike controls
- Large, smooth, sealed Enduro ball bearing that encircles the handlebar
- Clean and efficient cable routing flows around disc brake levers
- Adjustable reach for ideal ergonomics and controls clearance
- Compatible with all cabled actuated dropper posts
- Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post
- Works with any mountain bike handlebar
- Can be rotated to your preferred position
$79.95 - $89.95
Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52t rings.
- Fits 130 BCD 5 arm cranksets
- Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.
- Alternating wide/narrow tooth pattern prevents chain derailment
Compatibility:
- These rings are for use with 130 BCD 5-arm cranksets.
- Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800
- Not compatible with Campy CX10/11.
- SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features a fifth bolt with 1x specific shoulder. This kit can be found online.
- 38T important note: The chain may contact the spider arm slightly when using the 38T chainring (see last photo in the product images).
We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring.
- Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting.
Tech Specs:
- Weight: 38t/52g | 40t/60g | 42t/62g | 44t/79g | 52t/132g
- Material: 7075-T6 aluminum
- Made in the USA
- This 1x chainring and can be mounted in either the inner or outer ring position of a double crankset but can not be used in a 2x setup.
- Chainline - The most common mounting is in the outer ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring)
Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo.
Recommendations -
If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.
White Industries Square Taper Bottom Bracket
73x121mm
Stainless Steel.
Special Order for a customer that ended up going a different direction.
Brand spanking new.
This is one of the first products White Industries ever produced and remains a popular item all these years later! This is a BSA “square taper” style bottom bracket which uses BSA threads and a spindle that uses a square/tapered crank arm interface. It is compatible with White Industries ENO square taper and Road Square Taper cranks as well as other brands that use a J.I.S. (Japanese Industrial Standard) taper such as Shimano, Sugino, and others. These bottom brackets are not compatible with Campy cranks!
$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$48.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components.
- Bead-blasted, then anodized, finish
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design for easy installation
$65.00 - $70.00
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets.
- Convenient finger adjustment of saddle angle
- Unidirectional carbon shaft, forged aluminum head
- No rider weight limit
- 5 year Whisky warranty
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"
$75.00 - $78.00
Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider.
- 7050 Alloy
- 282g (42cm)
- Drop: 116mm
- Reach: 68mm
- Flare: 12°
- Measured Center-to-Center at the levers
$78.00 - $80.00
The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.
$105.00
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7.
- Carbon shaft absorbs trail chatter
- UD carbon shaft, forged aluminum head
$160.00 - $165.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package.
- Unidirectional carbon fiber construction
- 35mm stem clamp
- 8 degrees of backsweep with 5 degrees of upsweep
- Trimmable ends, made easy with graphic markings
- Rated to ASTM Condition 4 for extreme off-road riding
$215.00
Whisky's No.9 12f is their most versatile carbon drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider.
- Carbon
- 220g (42cm)
- Drop: 116mm
- Reach: 68mm
- Flare: 12°
- Measured Center-to-Center at the levers
$215.00
Whisky's No.9 24f Carbon Drop Bar is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.
- Carbon
- 220g (42cm)
- Drop: 116mm
- Reach: 68mm
- Flare: 24°
- Measured Center-to-Center at the levers
$280.00
Whisky's all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar's flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories, including aero bars.
- Available in five widths, measured center-to-center at the hoods: 40, 42, 44, 46, 48cm
- Compound flare — 12 degrees at the hoods and 20 degrees through the drops
- Drop/Reach: 100mm/68mm
- 31.8mm clamp diameter
Specifications:
- Bar Top Style: Flat
- Width Measurement: Center
- Bar Clamp Diameter (mm): 31.8
- Accessory Mount Diameter: 31.8
- Bar Reach (mm): 68
- Material: Carbon
- Clip-on Compatible: Yes
- Bar Drop (mm): 100
- Flare: 20
- Defined Color: Black
- Weight: 236
- Drop Bend Style: Compact
$1.00
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$4.00
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$12.00
Derailleur shims for adapting front derailleur clamps to a different sized frame seat tube.
- Derailleur = the size of the clamp on the front derailleur you have
- Frame = the size of the seat tube the derailleur plus shim will fit
$13.60
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$17.10 - $29.50
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$18.38
Loose ball bearings in bags or bottles.
- Replacement loose ball bearings
$18.64
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$18.64
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$22.05
Loose ball bearings in bags or bottles.
- Replacement loose ball bearings
$25.00
Enduro 24X37 ABEC-3 Sealed Bearing. Replacement bearing for Wheels Mfg bottom brackets for 24mm (Shimano) and 22mm/24mm (SRAM GXP) spindle cranks.
ABEC-3 bearings are the most economical bearing Enduro offers but are extremely tough and durable.
Grade 10 chromium steel balls are within 10/1,000,000" round. These are twice as round as the industry standard. 52100 high carbon chromium alloy races go through a vacuum de-gassing process resulting in the purest chromium alloy steel, hardened to R-62. Keeping everything together are riveted steel retainers and sealed with LLB type seals.
- Dimensions: OD: 37mm / ID: 24mm / Width: 7mm
- ABEC-3 - Grade 10, 5/32" chromium steel balls
- Enduro Part # BB MR 2437 LLB-BLK
- Imported
- Sold in a bag of 2
$26.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$26.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$28.00
- Precision-machined brass brake cable ferrules for improved braking and shifting performance
- A flat bottom on the inside prevents housing from pulling through ferrules.
- 5mm ID for use with most braking cables
- 50-count bottle
$28.00
- Precision-machined brass shift cable ferrules for improved braking and shifting performance
- A flat bottom on the inside prevents housing from pulling through ferrules.
- 4mm ID for use with most shifting cables
- 50-count bottle
$28.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$33.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$34.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$48.00
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
$48.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application
- These hangers do not come with mounting hardware
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$118.65 - $119.00
Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g
$119.00
By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 30mm spindle cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. Note: Spindle length must be 103mm or longer when used in a 68mm wide shell; 108mm or longer when used in a 73mm wide shell. - Bearings: ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 83mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Weight: 151g
$55.00
Step, snap, and ride with confidence using the SPEEDPLAY easy tension walkable road cleat. While retaining all the advantages of the SPEEDPLAY Bike Pedal System, the easy action spring mechanism makes it a breeze to clip in and out. Enhanced walkability and adjustability make this bike cleat comfortable and functional for every level of cyclist.
What's Included?
- Cleat Assembly
- Screw Packet
- Quick Start Guide
- Important Product Information Guide
- Additional Tools Required for Assembly: #2 Philips Head Screwdriver
$55.00
Make every effort count with the SPEEDPLAY standard tension road cleat. This integrated system delivers the power and engagement required to take on everything from steep climbs to all out racing. The only system to feature continuous 3-axis adjustability for all out performance and comfort on the bike.
What's Included?
- Cleat Assembly (Including Cleat Surrounds)
- Screw Packet
- Quick Start Guide
- Important Product Information Guide
- Additional Tools Required for Assembly: #2 Philips Head Screwdriver
Page 1 of 11
Next page