Seat Bags

Made for bikepacking, gravel and adventure cycling, the Scape Saddle Roll Bag is a 100% waterproof, entirely welded bag designed to fit perfectly on almost any bike. Made for bikepacking, gravel and adventure cycling, the Scape Saddle Roll Bag is a 100% waterproof (IPX4 certified), entirely welded bag designed to fit perfectly on almost any bike. Built to last from rugged materials, and designed to maximise its 1L capacity. The roll closure allows easy access as well as space optimisation, rolling smaller when less carrying space is needed. Made from waterproof materials to be prepared for the ride, regardless of conditions. - Above reflective logo - Roll top closure to better optimise space - Plastic buckles with cam lock - Hypalon Velcro strap - Waterproof

The Scape Saddle Pocket Bag is a small, practical 100% waterproof bag for bikepacking or gravel cycling, used as a classic saddle bag or as a versatile pocket bag to attached in multiple ways to the other Scape bags for convenient additional storage space The Scape Saddle Pocket Bag is a small, practical 100% waterproof bag for bikepacking or gravel cycling that attaches in multiple ways. Made from welded construction, waterproof materials and details to protect the bag from tears and abrasions, it additionally uses internal padded foam on both sides to protect your belongings. A coated zipper with auto lock puller runs around the perimeter of the bag for maximum opening and hypalon patches on both sides guarantee protection. Used as a classic saddle bag or as a versatile pocket bag to attached in multiple ways to the other Scape bags for convenient additional storage space.

Banjo Brothers' Small Seat Bag is perfect for carrying a tube, tire levers, patch kit, a mini tool and some food (each sold separately). It's made from heavy-duty 840-denier nylon with a wide-mouth opening for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a blinkie.

Banjo Brothers' Medium Seat Bag is perfect for carrying gear on any length ride. And if you're going big, it expands to haul even more gear. It's made from heavy-duty 840-denier nylon with a wide-mouth opening for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a light. - Weight: 5 oz. - Dimensions: 6.75" L x 4" W x 3" H unexpanded - Capcity: 65-81 cubic inches - Heavy duty 840 denier nylon construction - Wide-opening design for easier access - Flap hinges up from bottom to keep contents in place - 360 degree reflective accents - Web loop for light

Made for Gravel & Bikepacking and Adventure Cycling, the Scape Seatpost Bag is a saddle pack designed as a holster attached to the saddle and seatpost made to hold its own waterproof dry sack. Made for gravel and adventure cycling, the Scape Seat Bag is a bikepacking bag made from two separate elements: a holster and a 100% waterproof (IPX4 certified) removable drybag. The holster is built from rugged materials to last, the holster bottom designed to act as a mudguard and protect the internal bag from any rear wheel contact. The dry bag easily compresses thanks to its air valve release mechanism to minimise bulk, and can be rolled smaller when less carrying space is needed. The daisy chain allows attachment of modular bags, and a loop is included to attach a rear light. Made from waterproof material to be prepared for any ride, regardless of conditions. HOLSTER - Lateral reflective logo - Plastic buckles with cam lock - Aluminium hook to fix the dry bag into the holster - Vertical daisy chain for extra bags attachment - Reinforced fabric at all points of contact to the seat and wheel - Dryhole to drain any water drops or condensation - Nylon webbing - Loop for mounting a rear light DRY BAG - 420D Nylon fully welded - Waterproof - Roll closure - Air pressure valve to minimize the space

If you'd prefer to carry your gear in a bag rather than stretching out your jersey pockets, Banjo Brothers' Large Seat Bag is perfect for you. It'll hold a tube, tire levers, patch kit, a mini tool, your wallet, some food, even a wind vest or camera (each sold separately). And if you're going big, it expands to haul more gear. It's made from heavy-duty 840-denier nylon with a wide-opening design for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a blinkie.

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

We set out to create the most stable, low profile mounted, feature loaded, waterproof seat bag available. The Spinelock seat bag checks all the boxes. The Spinelock integrates user tested and approved features like a one-way air purge valve, rear light slots, loop and bungee deck, and an external plastic bottom with a new patented attachment system. Stability was the driving element in the design process. If you want something you can pack and forget, the Spinelock is your seat bag. There are two size options, neither of which sacrifice features for capacity. The smaller but largely versatile Spinelock 10L maximizes your carry with minimal tire clearance and provides a generous amount of waterproof storage with additional space on the external corded deck. . If you are going on a long expedition or carrying cold weather gear we recommend checking out the Spinelock 16L. How it works: - The Spinelock stability system consists of three components: the saddle clamp, seat bag mounted "Spine" baseplate, and pin. - A low profile, high strength, forged aluminum clamp works in combination with precision IGUS bushings to form the pin interface. Twin forged upper arms, fastened by Torx-25 bolts, rotate into position above the saddle rails for easy mounting. - Resembling a spine ramp familiar to skateboarders, the "Spine" baseplate is made of an impact resistant UV-stabilized nylon and is integrated to the seat bag surface. The plate features two mounting positions to accommodate seatpost setback and saddle adjustments. To connect the bag, you simply line up your selected mounting position to the seat mounted clamp and slide the pin through the aligned holes. Attaching the side compression straps to the wings of the clamp fixes the pin in place and you're ready to ride!